Your quest to for guitar lessons to learn as well as grasp guitar should start at your extremely beginning, it should start from exactly where you have the ability to begin. Private Guitar Instructions is an excellent way to go, if you have the ability to locate the cash for it. In situation of exclusive system, your Guitar instructor should be requiring, A requiring guitar trainer is very vital to enhance your skills.
Baltimore Online Guitar Lessons Vs Private Guitar Lessons
The bass guitar (also called electric bass, or simply bass) is a stringed instrument played primarily with the fingers or thumb, by plucking, slapping, popping, strumming, tapping, thumping, or picking with a plectrum, often known as a pick.
The bass guitar is similar in appearance and construction to an electric guitar, but with a longer neck and scale length, and four to six strings or courses. The four-string bass, by far the most common, is usually tuned the same as the double bass, which corresponds to pitches one octave lower than the four lowest pitched strings of a guitar (E, A, D, and G). The bass guitar is a transposing instrument, as it is notated in bass clef an octave higher than it sounds (as is the double bass) to avoid excessive ledger lines. Like the electric guitar, the bass guitar has pickups and needs to be connected to an amplifier and speaker, which makes a sound loud enough to hear.
Since the 1960s, the bass guitar has largely replaced the double bass in popular music as the bass instrument in the rhythm section. While types of basslines vary widely from one style of music to another, the bassist usually plays a similar role: anchoring the harmonic framework and establishing the beat. Many styles of music include the bass guitar, including rock, heavy metal, pop, punk rock, country, reggae, gospel, blues, symphonic rock, and jazz. It is often a solo instrument in jazz, jazz fusion, Latin, funk, progressive rock and other rock and metal styles.Musical instrument inventor Paul Tutmarc outside his music store in Seattle, Washington
In the 1930s, musician and inventor Paul Tutmarc from Seattle, Washington, who was manufacturing lap steel guitars, developed the first electric string bass in its modern form, a fretted instrument designed to be played horizontally. The 1935 sales catalog for Tutmarc's electronic musical instrument company, Audiovox, featured his "Model 736 Bass Fiddle", a four-stringed, solid-bodied, fretted electric bass instrument with a 30 1⁄2-inch (775 mm) scale length. The adoption of a "guitar" form made the instrument easier to hold and transport than any of the existing stringed bass instruments. The addition of frets enabled bassists to play in tune more easily than on acoustic or electric upright basses. Around 100 of these instruments were made during this period.
Around 1947, Tutmarc's son, Bud, began marketing a similar bass under the Serenader brand name, prominently advertised in the nationally distributed L. D. Heater Music Company wholesale jobber catalogue of 1948. However, the Tutmarc family inventions did not achieve market success.An early Fender Precision Bass
In the 1950s, Leo Fender, with the help of his employee George Fullerton, developed the first mass-produced electric bass guitar. Fender was the founder of Fender Electric Instrument Manufacturing Company, which made electric popular brands of electric guitars, basses and amplifiers. Fender's Fender Precision Bass, which began production in October 1951, became a widely copied industry standard for the instrument. The Precision Bass (or "P-bass") evolved from a simple, un-contoured "slab" body design and a single coil pickup similar to that of a Telecaster, to a contoured body design with beveled edges for comfort and a split single coil pickup.Design patent issued to Leo Fender for the second-generation Precision Bass
The "Fender Bass" was a revolutionary new instrument for gigging musicians. In comparison with the upright bass, which had been the main bass instrument in popular music, folk and country from the early 1900s to the 1940s, the Fender bass could be easily transported to shows. It was also less prone to feedback when amplified, than acoustic bass instruments. In 1953 Monk Montgomery became the first bass player to tour with the Fender bass guitar, in Lionel Hampton's postwar big band. Roy Johnson, and Shifty Henry with Louis Jordan & His Tympany Five, were other early Fender bass pioneers.Bill Black, playing with Elvis Presley, switched from upright bass to the Fender Precision Bass around 1957. The bass guitar was intended to appeal to guitarists as well as upright bass players, and many early pioneers of the instrument, such as Carol Kaye and Joe Osborn, were originally guitarists.
Following Fender's lead, in 1953, Gibson released the first short scale violin-shaped electric bass with extendable end pin, allowing it to be played upright or horizontally. Gibson renamed the Electric Bass in 1958 to the EB-1. Also in 1958 Gibson released the maple arched top EB-2 described in the Gibson catalogue as "A hollow-body electric bass that features a Bass/Baritone pushbutton for two different tonal characteristics". In 1959 these were followed by the more conventional-looking EB-0 Bass. The EB-0 was very similar to a Gibson SG in appearance (although the earliest examples have a slab-sided body shape closer to that of the double-cutaway Les Paul Special).Gibson EB-3
Whereas Fender basses had pickups mounted in positions in between the base of the neck and the top of the bridge, many of Gibson's early basses featured one humbucking pickup mounted directly against the neck pocket. The EB-3, introduced in 1961, also had a "mini-humbucker" at the bridge position. Gibson basses also tended to be smaller, sleeker instruments; Gibson did not produce a 34-inch (864 mm) scale bass until 1963 with the release of the Thunderbird, which was also the first Gibson bass to use dual-humbucking pickups in a more traditional position, about halfway between the neck and bridge. A number of other companies also began manufacturing bass guitars during the 1950s: Kay in 1952, Hofner and Danelectro in 1956, Rickenbacker in 1957 and Burns/Supersound in 1958.
1956 saw the appearance at the German trade fair "Musikmesse Frankfurt" of the distinctive Höfner 500/1 violin bass made using violin construction techniques by Walter Höfner, a second generation violin luthier. The instrument is often known as the "Beatle Bass", due to its endorsement and use by Beatles bassist Paul McCartney. In 1957 Rickenbacker introduced the model 4000 bass, the first bass to feature a neck-through-body design in which the neck is part of the body wood. The Fender and Gibson versions used bolt-on and glued-on necks.
With the explosion of the popularity of rock music in the 1960s, many more manufacturers began making electric basses, including the Japanese manufacturers Yamaha, Teisco and Guyatone. First introduced in 1960, the Fender Jazz Bass was known as the Deluxe Bass and was meant to accompany the Jazzmaster guitar. The Jazz Bass (often referred to as a "J-bass") featured two single-coil pickups, one close to the bridge and one in the Precision bass' split coil pickup position. The earliest production basses had a 'stacked' volume and tone control for each pickup. This was soon changed to the familiar configuration of a volume control for each pickup, and a single, passive tone control. The Jazz Bass' neck was narrower at the nut than the Precision bass — 1 1⁄2 inches (38 mm) versus 1 3⁄4 inches (44 mm) — allowing for easier access to the lower strings and an overall spacing and feel closer to that of an electric guitar, allowing trained guitarists to transition to the bass guitar more easily.1970s Fender Jazz Bass with maple fretboard
Another visual difference that set the Jazz Bass apart from the Precision is its "offset-waist" body. Pickup shapes on electric basses are often referred to as "P" or "J" pickups in reference to the visual and electrical differences between the Precision Bass and Jazz Bass pickups.
Fender also began production of the Mustang Bass; a 30-inch (762 mm) scale length instrument used by bassists such as Tina Weymouth of Talking Heads and Bill Wyman of The Rolling Stones ("P" and "J" basses have a scale length of 34 inches (864 mm), a design echoed on most current production electric basses of all makes). In the 1950s and 1960s, the instrument was often called the "Fender bass", due to Fender's early dominance in the market. The Fender VI, a baritone guitar, was tuned one octave lower than standard guitar tuning. It was released in 1961, and was favored by Jack Bruce of Cream.
Gibson introduced the short-scale 30 1⁄2-inch (775 mm) EB-3 in 1961, also used by Jack Bruce.A Rickenbacker 4001 bass.
In 1971, Alembic established the template for what became known as "boutique" or "high-end" electric bass guitars. These expensive, custom-tailored instruments, as used by Phil Lesh, Jack Casady, and Stanley Clarke, featured unique designs, premium hand-finished wood bodies, and innovative construction techniques such as multi-laminate neck-through-body construction and graphite necks. Alembic also pioneered the use of onboard electronics for pre-amplification and equalization. Active electronics increase the output of the instrument, and allow more options for controlling tonal flexibility. Giving the player the ability to amplify as well as attenuate (turn down) certain frequency ranges while improving the overall frequency response (more low-register and high-register sounds). 1973 saw the UK company Wal begin production of a their own range of active basses, and In 1974 Music Man Instruments, founded by Tom Walker, Forrest White and Leo Fender, introduced the StingRay, the first widely produced bass with active (powered) electronics.
Specific bass brands/models became identified with particular styles of music, such as the Rickenbacker 4001 series, which became identified with progressive rock bassists like Chris Squire of Yes, and Geddy Lee of Rush, while the StingRay was used by funk/disco players such Louis Johnson of the funk band The Brothers Johnson and Bernard Edwards of Chic. The 4001 stereo bass was introduced in the late 1960s; it can be heard on from the Beatles "I Am The Walrus".
In the mid-1970s, Alembic and other boutique bass manufacturers, such as Tobias, produced four-string and five-string basses with a low "B" string. In 1975, bassist Anthony Jackson commissioned luthier Carl Thompson to build a six-string bass tuned (low to high) B0, E1, A1, D2, G2, C3. In comparison with a standard four-string bass, Jackson's six-string adds a low B string and a high C string. These 5 and 6-string "extended-range basses" would become popular with session bassists as they reduced the need for re-tuning to alternate detuned configurations like "drop D", and also allowed the bassist to play more notes from the same position on the fretboard with fewer shifts up and down the fingerboard, a crucial benefit for a session player sightreading basslines at a recording session.An early 1980s-era Steinberger headless bass. The tuning machines are at the heel of the instrument, where the bridge is usually located.
In the 1980s, bass designers continued to explore new approaches. Ned Steinberger introduced a headless bass in 1979 and continued his innovations in the 1980s, using graphite and other new materials and (in 1984) introducing the TransTrem tremolo bar. In 1982, Hans-Peter Wilfer founded Warwick, to make a European bass, as the market at the time was dominated by Asian and American basses. Their first bass was the Streamer Bass, which is similar to the Spector NS. In 1987, the Guild Guitar Corporation launched the fretless Ashbory bass, which used silicone rubber strings and a piezoelectric pickup to achieve a "upright bass" sound with a short 18-inch (457 mm) scale length. In the late 1980s, MTV's "Unplugged" show, which featured bands performing with acoustic instruments, helped to popularize hollow-bodied acoustic bass guitars amplified with piezoelectric pickups built into the bridge of the instrument.
During the 1990s, as five-string basses became more widely available and more affordable, an increasing number of bassists in genres ranging from metal to gospel began using five-string instruments for added lower range—a low "B" string. As well, onboard battery-powered electronics such as preamplifiers and equalizer circuits, which were previously only available on expensive "boutique" instruments, became increasingly available on mid-priced basses. From 2000 to the 2010s, some bass manufacturers included digital modelling circuits inside the instrument on more costly instruments to recreate tones and sounds from many models of basses (e.g., Line 6's Variax bass). A modelling bass can digitally emulate the tone and sound of many famous basses, ranging from a vintage Fender Precision to a Rickenbacker. However, as with the electric guitar, traditional "passive" bass designs, which include only pickups, tone and volume knobs (without a preamp or other electronics) remained popular. Reissued versions of vintage instruments such as the Fender Precision Bass and Fender Jazz Bass remained popular amongst new instrument buyers up to the 2010s. In 2011, a 60th Anniversary P-bass was introduced by Fender, along with the re-introduction of the short-scale Fender Jaguar Bass.
Bass bodies are typically made of wood, although other materials such as graphite (for example, some of the Steinberger designs) and other lightweight composite materials have also been used. While a wide variety of woods are suitable for use in the body, neck, and fretboard of the bass guitar, the most common types of wood used are similar to those used for electric guitars; alder, ash or mahogany for the body, maple for the neck, and rosewood or ebony for the fretboard. While these traditional standards are most common, for tonal or aesthetic reasons luthiers more commonly experiment with different tonewoods on basses than with electric guitars (though this is changing), and rarer woods like walnut and figured maple, as well as exotic woods like bubinga, wenge, koa, and purpleheart, are often used as accent woods in the neck or on the face of mid- to high-priced production basses and on custom-made and boutique instruments.
Other design options include finishes, such as lacquer, wax and oil; flat and carved designs; luthier-produced custom-designed instruments; headless basses, which have tuning machines in the bridge of the instrument (e.g., Steinberger and Hohner designs) and several artificial materials such as luthite. The use of artificial materials (e.g., BassLab) allows for unique production techniques such as die-casting, to produce complex body shapes. While most basses have solid bodies, they can also include hollow chambers to increase the resonance or reduce the weight of the instrument. Some basses are built with entirely hollow bodies, which change the tone and resonance of the instrument. Acoustic bass guitars have a hollow wooden body constructed similarly to an acoustic guitar, and are typically equipped with piezoelectric or magnetic pickups and amplified.
Instruments handmade by highly skilled luthiers are becoming increasingly available in the 2010s. Exotic materials used in high-end instruments include woods such as bubinga, wenge, ovangkol, ebony and goncalo alves. Graphite composite is used to make lightweight necks Exotic woods are used on more expensive instruments: for example, Alembic uses cocobolo as a body or top layer material because of its attractive grain. Warwick bass guitars are also well known for exotic hardwoods: most of the necks are made of ovangkol, and the fingerboards use wenge or ebony. Solid bubinga bodies are also used for their tonal and aesthetic qualities.
A common feature of more expensive basses is "neck-through" construction. Instead of milling the body from a single piece of wood (or "bookmatched" halves) and then attaching the neck into a pocket (so-called "bolt-on" design), neck-through basses are constructed first by assembling the neck, which may comprise one, three, five or more layers of wood in vertical stripes, which are longer than the length of the fretboard. To this elongated neck, the body is attached as two wings, which may also be made up of several layers. The entire bass is then milled and shaped. Neck-through construction advertisements claim this approach provides better sustain and a mellower tone than bolt-on neck construction. While neck-through construction is most common in handmade "boutique" basses, some models of mass-produced basses such as Ibanez's BTB series also have neck-through construction. Bolt-on neck construction does not necessarily imply a cheaply made instrument; virtually all traditional Fender designs still use bolt-on necks, including its high-end instruments costing thousands of dollars, and many boutique luthiers such as Sadowsky build bolt-on basses as well as neck-through instruments.
The number of frets installed on a bass guitar neck may vary. The original Fender basses had 20 frets, and most bass guitars have between 20 and 24 frets or fret positions. Instruments with between 24 and 36 frets (2 and 3 octaves) also exist. Instruments with more frets are used by bassists who play bass solos, as more frets gives them additional upper range notes. When a bass has a large number of frets, such as a 36 fret instrument, the bass may have a deeper "cutaway" to enable the performer to reach the higher pitches. Like electric guitars, fretted basses typically have markers on the fingerboard and on the side of the neck to assist the player in determining where notes and important harmonic points are. The markers indicate the 3rd, 5th, 7th, 9th fret and 12th fret (the 12th fret being the octave of the open string) and on the octave-up equivalents of the 3rd fret and as many additional positions as an instrument has frets for. Typically, one marker is used for the 3rd, 5th, 7th and 9th fret positions and two markers are used for the 12th fret.
The long scale necks on Leo Fender's basses—with a scale length (distance between nut and bridge) of 34 inches (864 mm) — set the standard for electric basses, although 30-inch (762 mm) "short scale" instruments, such as the Höfner 500/1 "violin bass" played by Paul McCartney, and the Fender Mustang Bass are also common. Short scale instruments use the same E-A-D-G tuning as a regular long scale instrument. Short scale instruments are good choices for bassists with smaller hands, such as children or young teens who are just starting the instrument. While 35-inch (889 mm), 35 1⁄2-inch (902 mm), and 36-inch (914 mm) scale lengths were once only available in "boutique" instruments, in the 2000s (decade), many manufacturers began offering these "extra long" scale lengths. This extra long scale provides a higher string tension, which may yield a more defined, deep tone on the low "B" string of five- and six-stringed instruments (or detuned four-string basses).A fretless bass with flatwound strings; markers are inlaid into the side of the fingerboard, to aid the performer in finding the correct pitch.
Another design consideration for the bass is whether to use frets on the fingerboard. On a fretted bass, the metal frets divide the fingerboard into semitone divisions (as on an electric guitar or acoustic guitar). Fretless basses have a distinct sound, because the absence of frets means that the string must be pressed down directly onto the wood of the fingerboard with the fingers, as with the double bass. The string buzzes against the wood and is somewhat muted because the sounding portion of the string is in direct contact with the flesh of the player's finger. The fretless bass allows players to use the expressive approaches such as glissando (sliding up or down in pitch, with all of the pitches in between sounding), and true vibrato (in which the player alternates adds expression to a note by rocking the finger which is stopping the note and raising or lowering the pitch slightly). Players may also play music utilising microtones, or temperaments other than equal temperament, such as just intonation.
While fretless basses are often associated with jazz and jazz fusion, bassists from other genres have used fretless basses, such as Freebo (country), Rick Danko (rock/blues), Rod Clements (folk), Steve DiGiorgio (metal) and Colin Edwin (modern/progressive rock). Some bassists alternate between fretted and fretless basses in performances, according to the type of material or tunes they are performing, e.g., Pino Palladino or Tony Levin.
The first fretless bass guitar was made by Bill Wyman in 1961 when he converted an inexpensive Japanese fretted bass by simply removing the frets and filling in the slots cut into the neck with wood putty. The first production fretless bass was the Ampeg AUB-1 introduced in 1966, and Fender introduced a fretless Precision Bass in 1970. Around 1970, Rick Danko from The Band began to use an Ampeg fretless, which he modified with Fender pickups—as heard on the 1971 Cahoots studio album and the Rock of Ages album recorded live in 1971. Danko said, "It's a challenge to play fretless because you have to really use your ear." In the early 1970s, fusion-jazz bassist Jaco Pastorius had the fingerboard of his de-fretted Fender Jazz Bass coated in epoxy resin, allowing him to use roundwound strings for a brighter sound. Some fretless basses have "fret line" markers inlaid in the fingerboard as a guide, while others only use guide marks on the side of the neck.
Tapewound (double bass type) and flatwound strings are sometimes used with the fretless bass so the metal string windings do not wear down the fingerboard. Tapewound and flatwound strings have a distinctive tone and sound. Some fretless basses have epoxy-coated fingerboards, or fingerboards made of an epoxy composite like micarta, to increase the fingerboard's durability, enhance sustain, and give a brighter tone.The tuning machines (with spiral metal worm gears) are mounted on the back of the headstock on the bass guitar neck.
The standard design for the electric bass guitar has four strings, tuned E, A, D and G, in fourths such that the open highest string, G, is an eleventh (an octave and a fourth) below middle C, making the tuning of all four strings the same as that of the double bass (E1–A1–D2–G2). This tuning is also the same as the standard tuning on the lower four strings on a six-string guitar, only an octave lower.
There are a range of different string types include all-metal strings (which are available in many varieties, including roundwound, flatwound, halfwound, ground wound, and pressure wound); as well as metal strings with different coverings, such as tapewound and wound with plastic coatings. The variety of materials used in the strings gives bass players a range of tonal options. In the 1950s and early 1960s, bassists mostly used flatwound strings with a smooth surface, which had a smooth, damped sound reminiscent of a double bass. In the late 1960s and 1970s, roundwound bass strings producing a brighter tone similar to steel guitar strings became popular, though flatwounds also remain in use by players seeking a vintage tone. Roundwounds have a brighter timbre with longer sustain than flatwounds.
A variety of tuning options and number of string courses have been used to extend the range of the instrument, or facilitate different modes of playing. The most common are four, five, or six strings:Washburn XB600, a six string bass Note positions on a right-handed four-string bass in standard E–A–D–G tuning (from lowest-pitched string to the highest-pitched string), shown up to the 12th fret, where the pattern repeats. The dots below the frets are often inlaid into the wood of bass necks, as a visual aid to help the player find different positions. A bass guitar headstock with detuner set to D position. A seven-string fretless bass
Some bassists use other types of tuning to extend the range or get other benefits, such as providing multiple octaves of notes at any given position, or a larger tonal range. Instrument types or tunings used for this purpose include basses with fewer than four strings (one-string bass guitars, two-string bass guitars, three-string bass guitars [tuned to E–A–D]) and alternative tunings e.g., tenor bass.
Extended range basses (ERBs) are basses with six to twelve strings—with the additional strings used for range rather than unison or octave pairs. A seven-string bass (B0–E1–A1–D2–G2–C3–F3) was built by luthier Michael Tobias in 1987. This instrument, commissioned by bassist Garry Goodman, was an early example of a bass with more than six single course strings. In 1999 South American ERB player Igor Saavedra designed one of the first eight-string ERBs known, and asked Luthier Alfonso Iturra to build it for him.  Conklin builds custom ERB basses. The Guitarbass is a ten-string instrument with four bass strings (tuned E–A–D–G) and six guitar strings (tuned E–A–D–G–B–E). Luthier Michael Adler built the first eleven-string bass in 2004 and completed the first single-course 12-string bass in 2005. Adler's 11- and 12-string instruments have the same range as a grand piano. Subcontrabasses, such as C♯–F♯–B–E (the lowest string, C♯0 being at 17.32 Hz at around the limit of human hearing) have been created. Ibanez had released SR7VIISC in 2009, featuring a 30-inch (762 mm) scale and narrower width, and tuned as B–E–A–D–G–C–E; the company dubbed it a cross between bass and guitar.[better source needed]
In 2011 Warwick released a new Thumb NT 7 bass for Jeroen Paul Thesseling, featuring a 34-inch (864 mm) scale with subcontra tuning F♯–B–E–A–D–G–C. Yves Carbonne developed ten- and twelve-string fretless subbass guitars.
Piccolo basses are cosmetically similar to a four-stringed electric bass guitar, but usually tuned one whole octave higher than a normal bass. The first electric piccolo bass was constructed by luthier Carl Thompson for Stanley Clarke. To allow for the raised tuning, the strings are thinner, and the length of the neck (the scale) may be shorter. Several companies manufacture piccolo sets that can be put on any regular bass, thereby converting any bass into a piccolo bass. Because of the thinner strings, a new nut may be required to hold the strings. Some people prefer a slightly shorter scale, such as 30 or 28 inches (762 or 711 mm), as the higher tension required for longer scale lengths coupled with the thinner gauge of higher-pitched strings can make a long-scale piccolo bass difficult to play. The tuning varies with the personal tastes of the artist, as does the number of strings. Joey DeMaio from the heavy metal band Manowar plays with four strings on his piccolo bass. Jazz bassist John Patitucci used a six-string piccolo bass, unaccompanied, on his song "Sachi's Eyes" on his album One More Angel. Michael Manring has used a five-string piccolo bass in several altered tunings. Michael uses D'Addario EXL 280 piccolo bass strings on his four-string hyperbass, made by Zon Guitars.For more information on pickups, see Pick up (music technology).
Most electric bass guitars use magnetic pickups. The vibrations of the instrument's ferrous metal strings within the magnetic field of the permanent magnets in magnetic pickups produce small variations in the magnetic flux threading the coils of the pickups. This in turn produces small electrical voltages in the coils. These low-level signals are then amplified and played through a speaker. Most basses have a volume potentiometer, which can be turned up or down, and a tone potentiometer, which rolls off the high frequencies when it is turned to the player's right. Some basses may also have a pickup selector control or switch. Since the 1980s, basses are often available with battery-powered "active" electronics that boost the signal with a preamplifier, provide equalization controls to boost or cut bass and treble frequencies, or both.P-style, split-coil pickups Dual "J"-style pickups A Yamaha BB404F, which has two passive single coil pickups
Many basses have just one pickup, typically a "P" or "MM" pickup, though single soapbars are not unheard of. Multiple pickups are also quite common, two of the most common configurations being two "J" pickups (as on the stock Fender Jazz), or a "P" near the neck and a "J" near the bridge (e.g., Fender Precision Bass Special, Fender Precision Bass Plus). A two-"soapbar" configuration is also very common, especially on basses by makes such as Ibanez and Yamaha. A combination of a J or other single-coil pickup at the neck and a Music Man-style humbucker in the bridge has become popular among boutique builders, giving a very bright, focused tone that is good for jazz, funk and thumbstyle.
Some basses use more unusual pickup configurations, such as a soapbar and a "P" pickup (found on some Fenders), Stu Hamm's "Urge" basses, which have a "P" pickup sandwiched between two "J" pickups, and some of Bootsy Collins' custom basses, which had as many as 5 J pickups. Another unusual pickup configuration is found on some of the custom basses that Billy Sheehan uses, in which there is one humbucker at the neck and a split-coil pickup at the middle position.
The placement of the pickup greatly affects the sound. A pickup near the neck joint emphasizes the fundamental and low-order harmonics and thus produces a deeper, bassier sound, while a pickup near the bridge emphasizes higher-order harmonics and makes a "tighter" or "sharper" sound. Usually basses with multiple pickups allow blending of the output from the pickups, with electrical and acoustical interactions between the two pickups (such as partial phase cancellations) allowing a range of tonal effects.
The use of non-magnetic pickups allows bassists to use non-ferrous strings such as nylon, brass, polyurethane and silicone rubber. These materials produce different tones and, in the case of the polyurethane or silicone rubber strings, allow much shorter scale lengths.Main article: Bass instrument amplification This amplification setup is a "bass stack" approach, in which an amplifier (in this case a Hartke 5000) is plugged into separate speaker cabinets.
Like the electric guitar, the electric bass guitar is almost always connected to an amplifier and a speaker with a patch cord for live performances. Electric bassists use either a "combo" amplifier, which combines an amplifier and a speaker in a single cabinet, or an amplifier and one or more speaker cabinets (typically stacked, with the amplifier sitting on the speaker cabinets, leading to the term "half-stack" for one cabinet setups and "full stack" for two).
In most genres, a "clean" bass tone (without any amplifier-induced "overdrive" or "distortion") is desirable, and so while guitarists often prefer the more desirable distorted tones of tube-transistor amplifiers, bassists commonly use solid-state amplifier circuitry to achieve the necessary high output wattages with less weight than tubes (though smaller tubes can often still be found in the low-power "preamplifier" sections of the system, where they provide a warmer, smoother character to the bass tone for relatively little additional weight). A few all-tube bass amplifiers are still available, notably from the Ampeg brand.
In some cases, when the bass is used with large-scale PA amplification, it is plugged into a "DI" or direct box, which routes the signal to the bass amp while also sending the signal directly into a mixing console, and thence to the main and monitor speakers. When a recording of bass is being made, engineers may use a microphone set up in front of the amplifier's speaker cabinet for the amplified signal, a direct box signal that feeds the recording console, or a mix of both.
Various electronic bass effects such as preamplifiers, "stomp box"-style pedals and signal processors and the configuration of the amplifier and speaker can be used to alter the basic sound of the instrument. In the 1990s and early 2000s (decade), signal processors such as equalizers, overdrive devices (sometimes referred to as "fuzz bass"), and compressors or limiters became increasingly popular. Modulation effects like chorus, flanging, phase shifting, and time effects such as delay and looping are less commonly used with bass than with electric guitar, but they are used in some styles of music.
Most bass players stand while playing, using a strap over the shoulder to hold the instrument, although sitting is also accepted, particularly in large ensemble settings, such as jazz big bands or in acoustic genres such as folk music. Some bassists, such as Jah Wobble, alternate between standing or seated playing. It is a matter of the player's preference as to which position gives the greatest ease of playing and what a bandleader expects. When sitting, right-handed players can balance the instrument on the right thigh or like classical guitar players, the left. When sitting, no strap is required. Balancing the bass on the left thigh usually positions it in such a way that it mimics the standing position, allowing for less difference between the standing and sitting positions. Balancing the bass on the right thigh provides better access to the neck and fretboard in its entirety, especially the lower-pitched frets.James Jamerson was an influential bassist from the Motown era.
In contrast to the upright bass (or double bass), the electric bass guitar is played horizontally across the body, like an electric guitar. When the strings are plucked with the fingers (pizzicato), the index and middle fingers (and sometimes the thumb, ring, and little fingers as well) are used. James Jamerson, an influential bassist from the Motown era, played intricate bass lines using only his index finger, which he called "The Hook." There are also variations in how a bassist chooses to rest the right-hand thumb (or left thumb in the case of left-handed players). A player may rest his or her thumb on the top edge of one of the pickups or on the side of the fretboard, which is especially common among bassists who have an upright bass influence. Some bassists anchor their thumbs on the lowest string and move it off to play on the low string. Alternatively, the thumb can be rested loosely on the strings to mute the unused strings.
The string can be plucked at any point between the bridge and the point where the fretting hand is holding down the string; different timbres are produced depending on where along the string it is plucked. When plucked closer to the bridge, the string's harmonics are more pronounced, giving a brighter tone. Closer to the middle of the string, these harmonics are less pronounced, giving a more mellow tone.
Bassists trying to emulate the sound of a double bass sometimes pluck the strings with their thumb and use palm-muting to create a short, "thumpy" tone. The late Monk Montgomery (who played in Lionel Hampton's band) and Bruce Palmer (who performed with Buffalo Springfield) use thumb downstrokes. The use of the thumb was acknowledged by early Fender models, which came with a "thumbrest" or "Tug Bar" attached to the pickguard below the strings. Contrary to its name, this was not used to rest the thumb, but to provide leverage while using the thumb to pluck the strings. The thumbrest was moved above the strings in 1970s models (as a true thumbrest) and eliminated in the 1980s.Main article: Slapping (music) This picture shows the position and form of the slapping hand, for the slap bass style. The side of the thumb is used to "slap" one of the lower strings, while the fingers are used to "pop" notes from one of the two higher strings.
The slap and pop method, or "thumbstyle", most associated with funk, uses tones and percussive sounds achieved by striking, thumping, or "slapping" a string with the thumb and snapping (or "popping") a string or strings with the index or middle fingers. Bassists often interpolate left hand-muted "dead notes" between the slaps and pops to achieve a rapid percussive effect, and after a note is slapped or popped, the fretting hand may cause other notes to sound by using "hammer ons", "pull offs", or a left-hand glissando (slide). Larry Graham of Sly and the Family Stone and Graham Central Station was an early innovator of the slap style, and Louis Johnson of The Brothers Johnson is also credited as an early slap bass player.
Slap and pop style is also used by many bassists in other genres, such as rock (e.g., J J Burnel and Les Claypool), metal (e.g., Eric Langlois, Martin Mendez, Fieldy and Ryan Martinie), and fusion (e.g., Marcus Miller, Victor Wooten and Alain Caron). Slap style playing was popularized throughout the 1980s and early 1990s by pop bass players such as Mark King (from Level 42) and rock bassists such as with Pino Palladino (currently a member of the John Mayer Trio and bassist for The Who),Flea (from the Red Hot Chili Peppers) and Alex Katunich (from Incubus). Spank bass developed from the slap and pop style and treats the electric bass as a percussion instrument, striking the strings above the pickups with an open palmed hand. Wooten popularized the "double thump," in which the string is slapped twice, on the upstroke and a downstroke (for more information, see Classical Thump). A rarely used playing technique related to slapping is the use of wooden dowel "funk fingers", an approach popularized by Tony Levin.
The pick (or plectrum) is used to obtain a more articulate attack, for speed, or just personal preference. Although the use of a pick is primarily associated with rock and punk rock, picks are also used in other styles. Jazz bassist Steve Swallow often plays with a pick, while Pink Floyd bassist Roger Waters uses one for a heavier tone. Mike Gordon of Phish uses a pick while also incorporating slapping techniques into his playing. Picks can be used with alternating downstrokes and upstrokes, or with all downstrokes for a more consistent attack. The pick is usually held with the index and thumb, with the up-and-down plucking motion supplied by the wrist.
There are many varieties of picks available, but due to the thicker, heavier strings of the electric bass, bassists tend to use heavier picks than those used for electric guitar, typically ranging from 1.14 mm–3.00 mm (3.00 is unusual). Different materials are used for picks, including plastic, nylon, rubber, and felt, all of which produce different tones. Felt and rubber picks are used to emulate a fingerstyle tone.
Palm-muting is a widely used bass technique. The outer edge of the palm of the picking hand is rested on the bridge while picking, and "mutes" the strings, shortening the sustain time. The harder the palm presses, or the more string area that is contacted by the palm, the shorter the string's sustain. The sustain of the picked note can be varied for each note or phrase. The shorter sustain of a muted note on an electric bass can be used to imitate the shorter sustain and character of an upright bass. Palm-muting is commonly done while using a pick, but can also be done without a pick, as when doing down-strokes with the thumb.
One prominent example of the pick/palm-muting combination is Paul McCartney, who has consistently used this technique for decades. Sting also uses palm-muting; but often does so without a pick, using the thumb and first finger to pluck.This photo illustrates how Paul McCartney mutes the strings with his picking hand.
The fretting hand, the left hand for right-handed bass players and the right hand for left-handed bass players, is used to press down the strings to play different notes and shape the tone or timbre of a plucked or picked note. The fundamental technique used in the fretting hand is known as "a finger per fret", where each finger in the fretting hand plays one fret in a given position. Also, the double bass technique can be used for fretting. This technique involves the use of four fingers in the space of three frets, especially in the lower positions. When considering the spacing between notes, this is a comfortable distance for the average person's hand size. The main advantage of the "four fingers in three frets" technique is less tendon strain, leading to a diminished likelihood of Repetitive Strain Injury (RSI). The "four-in-three" technique is demonstrated in the image below (A bassist performing tapping).
The fretting hand can be used to change a sounded note, either by fully muting it after it is plucked or picked to shorten its duration or by partially muting it near the bridge to reduce the volume of the note, or make the note die away faster. The fretting hand is often used to mute strings that are not being played and stop the sympathetic vibrations, particularly when the player wants a "dry" or "focused" sound. On the other hand, the sympathetic resonance of harmonically related strings may be desired for some songs, such as ballads. In these cases, a bassist can fret harmonically related notes. For example, while fretting a sustained "F" (on the third fret of the "D" string), underneath an F major chord being played by a piano player, a bassist might hold down the "C" and low "F" below this note so their harmonics sound sympathetically.
The fretting hand can add vibrato to a plucked or picked note, either a gentle, narrow vibrato or a more exaggerated, wide vibrato with bigger pitch variations. For fretted basses, vibrato is always an alternation between the pitch of the note and a slightly higher pitch. For fretless basses, the player can use this style of vibrato, or they can alternate between the note and a slightly lower pitch, as is done with the double bass and on other unfretted stringed instruments. While vibrato is mostly done on "stopped" notes—that is, notes that are pressed down on the fingerboard—open strings can also be vibratoed by pressing down on the string behind the nut. As well, the fretting hand can be used to "bend" a plucked or picked note up in pitch, by pushing or pulling the string so that the note sounds at a higher pitch. To create the opposite effect, a "bend down", the string is pushed to a higher pitch before being plucked or picked and then allowed to fall to the lower, regular pitch after it is sounded. Though rare, some bassists may use a tremolo bar-equipped bass to produce the same effect.
In addition to pressing down one note at a time, bassists can also press down several notes at one time with their fretting hand to perform a double stop (two notes at once) or a chord. While double stops and chords are used less often by bassists than by electric guitarists playing rhythm guitar, a variety of double stops and chords can be performed on the electric bass. Some double stops used by bassists include octaves. Chords can be especially with effective on instruments with higher ranges such as six-string basses. Another variation to fully pressing down a string is to gently graze the string with the finger at the harmonic node points on the string, which creates chime-like upper partials (also called "overtones"). Glissando is an effect in which the fretting hand slides up or down the neck, which can be used to create a slide in pitch up or down. A subtle glissando can be performed by moving the fretting hand without plucking or picking the string; for a more pronounced effect, the string is plucked or picked first, or, in a metal or hardcore punk context, a pick may be scraped along the sides of the lower strings.A bassist performing tapping, in which notes are sounded by striking the strings against the fretboard
The fretting hand can also be used to sound notes, either by plucking an open string with the fretting hand, or, in the case of a string that has already been plucked or picked, by "hammering on" a higher pitch or "pulling off" a finger to pluck a lower fretted or open stringed note. Jazz bassists use a subtle form of fretting hand pizzicato by plucking a very brief open string grace note with the fretting hand right before playing the string with the plucking hand. When a string is rapidly hammered on, the note can be prolonged into a trill.
In the two-handed tapping styles, bassists use both hands to play notes on the fretboard by rapidly pressing and holding the string to the fret. Instead of plucking or picking the string to create a sound, in this technique, the action of striking the string against the fret or the fretboard creates the sound. Since two hands can be used to play on the fretboard, this makes it possible to play interweaving contrapuntal lines, to simultaneously play a bass line and a simple chord, or play chords and arpeggios. Bassist John Entwistle of The Who tapped percussively on the strings, causing them to strike the fretboard with a twangy sound to create drum-style fills. Players noted for this technique include Cliff Burton, Billy Sheehan, Stuart Hamm, John Myung, Victor Wooten, Les Claypool, Mark King, and Michael Manring. The Chapman Stick and Warr Guitars are string instruments specifically designed to be played using two-handed tapping.
Strumming, usually with finger nails, is a common technique on acoustic guitar, but it is not a commonly used technique for bass. However, a notable example is Stanley Clarke's bass playing on the introduction to "School Days", on the album of the same name.
Popular music bands and rock groups use the bass guitar as a member of the rhythm section, which provides the chord sequence or "progression" and sets out the "beat" for the song. The rhythm section typically consists of a rhythm guitarist or electric keyboard player, or both, a bass guitarist and a drummer; larger groups may add additional guitarists, keyboardists, or percussionists.
Bassists often play a bass line composed by an arranger, songwriter or composer of a song—or, in the case of a cover song, the bass line from the original. In other bands—e.g., jazz-rock bands that play from lead sheets and country bands using the Nashville number system—bassists are expected to improvise or prepare their own part to fit the song's chord progression and rhythmic style.This sample illustrates a simple pop bass line over a D major progression
Types of bass lines vary widely, depending on musical style. However, the bass guitarist generally fulfills a similar role: anchoring the harmonic framework (often by emphasizing the roots of the chord progression) and laying down the beat in collaboration with the drummer and other rhythm section instruments. The importance of the bass guitarist and the bass line varies in different styles of music. In some pop styles, such as 1980s-era pop and musical theater, the bass sometimes plays a relatively simple part as the music emphasizes vocals and melody instruments. In contrast, in reggae, funk, or hip-hop, entire songs may center on the bass groove, and the bass line is usually prominent in the mix.
In traditional music such as country music, folk rock, and related styles, the bass often plays the roots and fifth (typically the fifth below the root) of each chord in alternation. In these styles, bassists often use scalar "walkups" or "walkdowns" when there is a chord change. In Chicago blues, the electric bass often performs a walking bassline made up of scales and arpeggios. In blues rock bands, the bassist often plays blues scale-based riffs and chugging boogie-style lines. In metal, the bass guitar may perform complex riffs along with the rhythm guitarist or play a low, rumbling pedal point to anchor the group's sound.A blues bass line played with a pick
The bass guitarist sometimes breaks out of the strict rhythm section role to perform bass breaks or bass solos. The types of bass lines used for bass breaks or bass solos vary by style. In a rock band, a bass break may consist of the bassist playing a riff or lick during a pause in the song. In some styles of metal, a bass break may consist of "shred guitar"-style tapping on the bass. In a funk or funk rock band, a bass solo may showcase the bassist's percussive slap and pop playing. In genres such as progressive rock, art rock, or progressive metal, the bass guitar player may play melody lines along with the lead guitar (or vocalist) and perform extended guitar solos.
Chords are not used that often by electric bass players. However, in some styles, bassists may sound "double stops", such as octaves with open strings and powerchords. In Latin music, double stops with fifths are used.Robert Trujillo of Metallica is known for playing "massive chords"  and "chord-based harmonics"  on the bass. Lemmy of Motörhead often played power chords in his bass lines.
While bass guitar solos are not common in popular music, some artists, particularly in the heavy metal, funk, and progressive rock genres, do utilize them. In a rock context, bass guitar solos are structured and performed in a similar fashion as rock guitar solos, often with the musical accompaniment from the verse or chorus sections.
Bass solos are performed using a range of different techniques, such as plucking or fingerpicking. In the 1960s, The Who's bassist, John Entwistle, performed a bass break on the song "My Generation" using a plectrum. He originally intended to use his fingers, but could not put his plectrum down quickly enough. This is considered as one of the first bass solos in rock music, and also one of the most recognizable. Led Zeppelin's "Good Times Bad Times", the first song on their first album, contains two brief bass solos, occurring after the song's first and third choruses. Queen's bassist, John Deacon, occasionally played bass solos, such as on the song "Liar". Metallica's 1983 debut Kill Em All includes the song "(Anesthesia) Pulling Teeth," consisting entirely of a bass solo played by Cliff Burton. John McVie of Fleetwood Mac performed a bass solo on "The Chain" from the 1977 Rumours album.
Manowar's bassist Joey DeMaio uses special piccolo bass for his extremely fast bass solos like "Sting of the Bumblebee" and "William's Tale". Green Day bassist Mike Dirnt played a bass solo on the song "Welcome To Paradise" from the 1994 album Dookie and on the song "Makeout Party" from the 2012 album ¡Dos!. U2 includes a bass solo most notably on "Gloria", in which Adam Clayton utilizes several playing techniques. Matt Freeman of Rancid performs a very fast, guitar-like bass solo in the song "Maxwell Murder". Blink-182's "Voyeur" has a bass solo, which is featured on both their studio album Dude Ranch & their live album The Mark, Tom and Travis Show (The Enema Strikes Back!).
Heavy metal bass players such as Geezer Butler (Black Sabbath), Alex Webster (Cannibal Corpse), Cliff Burton (Metallica), and Les Claypool (Primus, Blind Illusion) have used chime-like harmonics and rapid plucking techniques in their bass solos. Geddy Lee of Rush has made frequent use of bass solos, such as on the instrumental "YYZ". In both published Van Halen concert videos, Michael Anthony performs unique maneuvers and actions during his solos. Funk bassists such as Larry Graham began using slapping and popping techniques for their solos, which coupled a percussive thumb-slapping technique of the lower strings with an aggressive finger-snap of the higher strings, often in rhythmic alternation. The slapping and popping technique incorporates a large number of muted (or 'ghost' tones) to normal notes to add to the rhythmic effect. Slapping and popping solos were prominent in 1980s pop and R&B, and they are still used by some modern funk and Latin bands.
When playing bass solos, rock and metal bassists sometimes use effects such as fuzz bass or a wah-wah pedal to produce a more pronounced sound. Notably, Cliff Burton of Metallica used both effects. Due to the lower range of the bass, bass guitar solos usually have a much lighter accompaniment than solos for other instruments. In some cases, the bass guitar solo is unaccompanied, or accompanied only by the drums.
The electric bass is a relative newcomer to the world of jazz. The big bands of the 1930s and 1940s Swing era and the small combos of the 1950s Bebop and Hard Bop movements all used the double bass. The electric bass was introduced in some bands in the 1950s and it became prominent during the late 1960s and early 1970s, when rock influences were blended with jazz to create jazz-rock fusion.A walking bass line, as referred to below. It is called a "walking" bass line because of the way it rises and falls using scale notes and passing notes.
The introduction of the electric bass in jazz fusion, as in the rock world, helped bassists play in high-volume stadium concerts with powerful amplifiers, because it is easier to amplify the electric bass than the double bass (the latter is prone to feedback in high-volume settings). The electric bass has both an accompaniment and a soloing role in jazz. In accompaniment, the bassist may perform walking basslines for traditional tunes and jazz standards, playing smooth quarter note lines that imitate the double bass. For latin or salsa tunes and rock-infused jazz fusion tunes, the electric bass may play rapid, syncopated rhythmic figures in coordination with the drummer, or lay down a low, heavy groove.
In a jazz setting, the electric bass tends to have a much more expansive solo role than in most popular styles. In most rock settings, the bass guitarist may only have a few short bass breaks or brief solos during a concert. During a jazz concert, a jazz bassist may have a number of lengthy improvised solos, which are called "blowing" in jazz parlance. Whether a jazz bassist is comping (accompanying) or soloing, they usually aim to create a rhythmic drive and "timefeel" that creates a sense of "swing" and "groove". For information on notable jazz bassists, see the List of jazz bassists article.
Contemporary classical music uses both the standard instruments of Western Art music (piano, violin, double bass, etc.) and newer instruments or sound producing devices, ranging from electrically amplified instruments to tape players and radios.
The electric bass guitar has occasionally been used in contemporary classical music (art music) since the late 1960s. Contemporary composers often obtained unusual sounds or instrumental timbres through the use of non-traditional (or unconventional) instruments or playing techniques. As such, bass guitarists playing contemporary classical music may be instructed to pluck or strum the instrument in unusual ways.
However, contemporary classical composers may also write for the bass guitar in order to utilise its unique sound, and in particular its precise and piercing attack and timbre. For example, Steve Reich, explaining his decision to score 2x5 for two bass guitars, stated that "[with electric bass guitars] you can have interlocking bass lines, which on an acoustic bass, played pizzicato, would be mud".Russian and Soviet composer Alfred Schnittke, pictured here in 1989, used electric bass for his Symphony no. 1 (1972) and Symphony no. 3 (1981).
American composers using electric bass in the 1960s included experimental classical music composer Christian Wolff (born 1934) (Electric Spring 1, 1966; Electric Spring 2, 1966/70; Electric Spring 3, 1967; and Untitled, 1996); Francis Thorne, a student of Paul Hindemith at Yale University (born 1922), who wrote (Liebesrock 1968–69); and Krzysztof Penderecki (Cello Concerto no. 1, 1966/67, rev. 1971/72), The Devils of Loudun, 1969; Kosmogonia, 1970; and Partita, 1971), Louis Andriessen (Spektakel, 1970; De Staat, 1972–76; Hoketus, 1976; De Tijd, 1980–81 and De Materie, 1984–1988). European composers who began scoring for the bass guitar in the 1960s included Danish composer Pelle Gudmundsen-Holmgreen (born 1932) (Symfoni på Rygmarven, 1966; Rerepriser, 1967; and Piece by Piece, 1968); Irwin Bazelon (Churchill Downs, 1970).
In the 1970s, electric bass was used by the American conductor-composer Leonard Bernstein (1918–1990) for his MASS (1971). American jazz pianist Dave Brubeck used bass guitar for his 1971 piece Truth Has Fallen. Russian and Soviet composer Alfred Schnittke used the instrument for his Symphony no. 1, 1972. In 1977, David Amram (born 1930) scored for electric bass in En memoria de Chano Pozo. Amram is an American composer known for his eclectic use of jazz, ethnic and folk music.
In the 1980s (and in following decades), electric bass was used in works by Hans Werner Henze (El Rey de Harlem, 1980; and Il ritorno d'Ulisse in patria, 1981), Harold Shapero, On Green Mountain (Chaconne after Monteverdi), 1957, orchestrated 1981; Schnittke's Symphony no. 3 (1981); Steve Reich's Electric Counterpoint (1987) and 2x5 (2008), Wolfgang Rihm (Die Eroberung von Mexico, 1987–91), Arvo Pärt (Miserere, 1989/92), Steve Martland (Dance works, 1993; and Horses of Instruction, 1994), Sofia Gubaidulina (Aus dem Stundenbuch, 1991), Giya Kancheli (Wingless, 1993), John Adams (I Was Looking at the Ceiling and Then I Saw the Sky, 1995; and Scratchband, 1996/97), Michael Nyman (various works for the Michael Nyman Band), Mark-Anthony Turnage (Blood on the Floor, 1993–1996), numerous works by Art Jarvinen.
The pedagogy and training for the electric bass varies widely by genre and country. Rock and pop bass has a history of pedagogy dating back to the 1950s and 1960s, when method books were developed to help students learn the instrument. One notable method book was Carol Kaye's How to Play the Electric Bass.
In the jazz scene, since the bass guitar takes on much of the same role as the double bass—laying down the rhythm, and outlining the harmonic foundation—electric bass players have long used both bass guitar methods and jazz double bass method books. The use of jazz double bass method books by electric bass players in jazz is facilitated in that jazz methods tend to emphasize improvisation techniques (e.g., how to improvise walking basslines) and rhythmic exercises rather than specific ways of holding or plucking the instrument.
Of all of the genres, jazz and the mainstream commercial genres (rock, R&B, etc.) have the most established and comprehensive systems of instruction and training for electric bass. In the jazz scene, teens can begin taking private lessons on the instrument and performing in amateur big bands at high schools or run by the community. Young adults who aspire to becoming professional jazz bassists or studio rock bassists can continue their studies in a variety of formal training settings, including colleges and some universities.
Several colleges offer electric bass training in the US. The Bass Institute of Technology (BIT) in Los Angeles was founded in 1978, as part of the Musician's Institute. Chuck Rainey (electric bassist for Aretha Franklin and Marvin Gaye) was BIT's first director. BIT was one of the earliest professional training program for electric bassists. The program teaches a range of modern styles, including funk, rock, jazz, Latin, and R&B.
The Berklee College of Music in Boston offers training for electric bass players. Electric bass students get private lessons and there is a choice of over 270 ensembles to play in. Specific electric bass courses include funk/fusion styles for bass; slap techniques for electric bass; fingerstyle R&B; five- and six-string electric bass playing (including performing chords); and how to read bass sheet music. Berklee College alumni include Jeff Andrews, Victor Bailey, Jeff Berlin, Michael Manring, and Neil Stubenhaus. The Bass Department has two rooms with bass amps for classes and ten private lesson studios equipped with audio recording gear. Berklee offers instruction for the four-, five-, and six-string electric bass, the fretless bass, and double bass. "Students learn concepts in Latin, funk, Motown, and hip-hop, ... jazz, rock, and fusion."
In Canada, the Humber College Institute of Technology & Advanced Learning offers an Advanced Diploma (a three-year program) in jazz and commercial music. The program accepts performers who play bass, guitar, keyboard, drums, melody instruments (e.g., saxophone, flute, violin) and who sing. Students get private lessons and perform in 40 student ensembles.The Manhattan School of Music, at the intersection of West 122nd Street (Seminary Row) and Broadway
Although there are far fewer university programs that offer electric bass instruction in jazz and popular music, some universities offer bachelor's degrees (B.Mus.) and Master of Music (M.Mus.) degrees in jazz performance or "commercial music", where electric bass can be the main instrument. In the US, the Manhattan School of Music has a jazz program leading to B.Mus. and M.Mus degrees that accepts students who play bass (double bass and electric bass), guitar, piano, drums, and melody instruments (e.g., saxophone, trumpet, etc.).
In the Australian state of Victoria, the Victorian Curriculum and Assessment Authority has set out minimum standards for its electric bass students doing their end-of-year Solo performance recital. To graduate, students must perform pieces and songs from a set list that includes Baroque suite movements that were originally written for cello, 1960s Motown tunes, 1970s fusion jazz solos, and 1980s slap bass tunes. A typical program may include a Prelude by J.S. Bach; "Portrait of Tracy" by Jaco Pastorius; "Twisted" by Wardell Gray and Annie Ross; "What's Going On" by James Jamerson; and the funky Disco hit "Le Freak" by Chic.
In addition to college and university diplomas and degrees, there are a variety of other training programs such as jazz or funk summer camps and festivals, which give students the opportunity to play a wide range of contemporary music, from 1970s-style jazz-rock fusion to 2000s-style R&B.
In other less mainstream genres, such as hardcore punk or metal, the pedagogical systems and training sequences are typically not formalized and institutionalized. As such, many players learn by ear, by copying bass lines from records and CDs, and by playing in a number of bands. Even in non-mainstream styles, though, students may be able to take lessons from experts in these or other styles, adapting learned techniques to their own style. As well, there are a range of books, playing methods, and, since the 1990s, instructional DVDs (e.g., how to play metal bass). In the 2010s, many instructional videos are available online on video-sharing websites such as YouTube.
Free Guitar Lessons For Beginners - How to Improve Your Guitar Playing
The Gibson Les Paul is a solid body electric guitar that was first sold by the Gibson Guitar Corporation in 1952. The Les Paul was designed by Gibson president Ted McCarty, factory manager John Huis and their team, along with guitarist/inventor Les Paul.
The Les Paul was originally offered with a gold finish and two P-90 pickups. In 1957, humbucking pickups were added, along with sunburst finishes in 1958. The sunburst 1958–1960 Les Paul – today one of the best-known electric guitar types in the world – was considered a failure, with low production and sales. For 1961, the Les Paul was redesigned into what is now known as the Gibson SG. This design continued as a separate guitar when the traditional single cutaway, carved top bodystyle was re-introduced in 1968. The Les Paul has been continually produced in countless versions and editions since. Along with Fender's Telecaster and Stratocaster, it was one of the first mass-produced electric solid-body guitars. Les Pauls have been used in many genres, including rock, country, pop, soul, rhythm and blues, blues, jazz, reggae, punk, and heavy metal.Les Paul and "Clunker" (1947) ES-150 (1936)
In 1950, the ancestors of Fender Telecaster (Fender Esquire and Fender Broadcaster) were introduced to the musical market and solid-body electric guitars became a public craze. In reaction to market demand, Gibson Guitar president Ted McCarty brought guitarist Les Paul into the company as a consultant. Les Paul was a respected innovator who had been experimenting with guitar design for years. He hand-built a solid-body prototype called "The Log", often suggested as the first solid-body Spanish guitar ever built. "The Log" was given its name from the pine block running through the middle of the guitar whose width and depth are a little more than the width of the fretboard; conventional hollow guitar sides or "wings" were added for shape. Although numerous other prototypes and limited-production solid-body models by other makers have since surfaced, it is known that in 1945–1946, Les Paul had approached Gibson with "The Log" prototype, but his solid body design was rejected.
In 1951, Paul, McCarty, and his team at the Gibson Guitar Corporation began work on what would eventually become the Les Paul Model. Early prototypes are very similar to the final version. The new Les Paul guitar was to be an expensive, well-made instrument in accordance with Gibson's reputation at the time. Although recollections differ regarding who contributed what to the Les Paul design, it was far from a replica of rival guitar manufacturer Fender's models.Les Paul logo on headstock
Additionally, Gibson's president Ted McCarty stated that the Gibson Guitar Corporation approached Les Paul for the right to imprint the musician's name on the headstock with the intention of increasing sales; in 1951, Gibson presented Paul a nearly finished instrument for approval. Subsequently, McCarty claimed that design discussions with Les Paul were limited to the tailpiece and the fitting of a maple cap over the mahogany body for increased density and sustain, which Les Paul had requested reversed. However, this reversal would have caused the guitar to become too heavy, and Paul's request was refused. Paul states that the original Custom should have had the maple cap and the Goldtop was to be all mahogany. The Custom did not appear on the market for another two years following the introduction of the Goldtop; it is possible that Gibson had planned a full model range of guitars (with a roll-out over the course of several years) at the time when initial specifications were being set. Les Paul's contributions to the guitar line bearing his name were more than cosmetic, but certainly included them. For example, Paul specified that the guitar be offered in a gold finish, not only for flashiness, but to emphasize the high quality of the Gibson Les Paul instrument. The later-issue Les Paul models included flame maple (tiger stripe) and "quilted" maple tops, again in contrast to the competing Fender line's range of car-like custom color finishes.
The 1952 Les Pauls featured two P-90 single coil pickups, and a one-piece, 'trapeze'-style bridge/tailpiece with strings fitted under (instead of over) a steel stop-bar.[note 4]
The guitar made its public debut when Paul used it onstage in June, 1952, at the Paramount theatre in New York. On July 24, 1952, at a special musicians clinic at the Waldorf-Astoria hotel, it was previewed by prominent guitarists such as Tiger Haynes, George Barnes, Mundell Lowe, Tony Mottola, and Billy Mure. The clinic preceded the annual NAMM Show held at the New Yorker hotel starting July 27, where the guitar was first received by the general public at Gibson's exhibit in rooms 611 through 615."Patent Applied For" (PAF) pickups on a Les Paul Standard Tune-o-matic bridge with stopbar tailpiece
A second Les Paul model was introduced in 1953. Called the Les Paul Custom, this black guitar with gold-plated hardware was dubbed the "Black Beauty". Various bridge and tailpiece designs were added in 1953 and 1954, including the popular Tune-o-matic bridge. The Goldtop and Custom models continued without significant changes until 1957. In 1957, P-90 pickups were no longer offered on Les Pauls. New humbucker pickups designed by Seth Lover in 1955 (U.S. Patent 2,896,491) debuted on Les Pauls in 1957. This innovation in pickups became the flagship pickup design most associated with Gibson. Many other guitar companies followed suit, outfitting their electrics with versions of the humbucking pickup.1959 Les Paul Standard Reissue Peter Green (1970) Jeff Beck (1968)
In 1958, the Les Paul saw its first major design change. A new model, called the Standard, retained most features of the 1957 Goldtop. However, Standards featured a cherry-red sunburst finish. These guitars were priced higher than the Goldtop models, but lower than the Customs. At this time, Gibson instruments were marketed toward an older, jazz-oriented audience rather than young burgeoning guitarists. As a result, over the three-year period of production, only c. 1,700 Standards were made.
These Les Pauls were considered to be too heavy and old-fashioned, and they initially did not find favor amongst guitarists. In 1961, Gibson stopped producing the traditional Les Paul in favor of a lighter redesign which was later called the SG. The mid-1960s, however, brought a resurgence of interest in the Les Paul Standard. In 1964, The Rolling Stones' Keith Richards began using a sunburst, 1959 Les Paul Standard – becoming the first "star-guitarist" to play a Les Paul on the British scene. The guitar, outfitted with a Bigsby tailpiece, served as one of the guitarist's prominent instruments and provided the first impetus to the use of Les Pauls during the British blues boom. In 1965, Eric Clapton began using Les Pauls because of the influence of Freddie King and Hubert Sumlin, and played a 1960 Standard on the groundbreaking album Blues Breakers with Eric Clapton. In America, Mike Bloomfield began using a 1954 Les Paul goldtop while touring with the Paul Butterfield Blues Band, and recorded most of his work on the band's East-West album with that guitar. A year later, he traded it for a 1959 Standard with which he became most identified. By 1967, Jerry Garcia of the Grateful Dead was using mid-1950's, P-90 pickup-equipped goldtops or black custom models, which he used through 1968. Concurrently, artists such as Peter Green, Jeff Beck, Paul Kossoff, and Jimmy Page began using sunburst Les Paul Standards in the late 1960s. Responding to this influence and increased pressure from the public, Gibson reintroduced Les' single-cutaway guitar in July 1968, and the guitar remains in production today.
1969 Standard (refinished) 1974 Custom Sunburst
In 1969, Gibson's parent company (Chicago Musical Instruments) was taken over by the conglomerate ECL. Gibson remained under the control of CMI until 1974 when it became a subsidiary of Norlin Musical Instruments.The pancake-like layers, seen on the edge of cross-banding, multi-piece body in Norlin Era
These ownership changes, often called the "Norlin Era", caused Gibson products of the time to decline in quality. Les Paul designs were altered and a reinforced upper neck volute to decrease headstock breaks was added. Neck woods were changed from one-piece mahogany to a three-piece maple design. The body was also changed from one-piece mahogany with a maple top to multiple slabs of mahogany with multiple pieced maple tops. This is referred to as "multipiece" construction, and sometimes incorrectly referred to as a "pancake" body. The expression "pancake body" actually refers to a body made of a thin layer of maple sandwiched between two slabs of mahogany, with a maple cap. The grain of the maple was placed at 90 degrees to that of the mahogany. The "pancake"-like layers are clearly visible when looking at the edge of the guitar. This process is also known as "crossbanding", and was done to make use of less expensive and more readily available thinner mahogany. Crossbanding was phased out by 1977.
In this era, Gibson began experimenting with new models, such as the Les Paul Recording. This guitar was generally unpopular with guitarists because of its complex electronics. Less noticeable changes included, but were not limited to, optional maple fingerboards (added in 1976), pickup cavity shielding, and the crossover of the ABR1 Tune-o-matic bridge into the wide "Nashville" bridge. During the 1970s, the Les Paul body shape was incorporated into other Gibson models, including the S-1, the Sonex, the L6-S, and other models that did not follow the classic Les Paul layout.Gibson Les Paul Custom Florentine
In January 1986, Gibson again changed ownership and began manufacturing a range of varied Les Paul models. The 1980s also saw the end to several design characteristics, including the volute and maple neck. However, because of consumer demand, the Gibson Les Paul guitar is available today in a wide array of choices, ranging from guitars equipped with modern digital electronics to classic re-issue models built to match the look and specifications of the guitar's earliest production runs from 1952 to 1960.
In 1986, to respond to the high demand for vintage models, Gibson formed a "Custom Shop" division. Originally, the Shop began producing accurate reproductions of early Les Pauls as well as one-off orders. Today, the Custom Shop produces numerous limited-run "historic-spec" models, as well as signature artist models. The first Custom Shop artist guitar was the 1996 Joe Perry Les Paul.
The post-1954 Les Paul guitar line included two models: the Standard (nicknamed the Goldtop), and the Custom (which offered gold hardware and a more formal black finish). However, advancements in pickup, body, and hardware designs allowed the Les Paul to become a long-term series of electric solid-body guitars that targeted multiple price-points and market levels.1952–53 Goldtop with trapeze bridge[note 5] 1953–55 Goldtop with stopbar bridge 1955–57 Goldtop with Tune-o-matic bridge and stopbar tailpiece 1957–58 Goldtop with PAF pickups
Goldtops, the first Les Paul model, were produced from 1952–1957. Early 1952 Les Pauls were not issued serial numbers, did not have bound fingerboards, and are considered by some as "LP Model prototypes". However, later 1952 Les Pauls were issued serial numbers and also came with bound fingerboards. Interestingly, the design scheme of some of these early models varied. For instance, some early Les Pauls were fitted with black covered P90 pickups instead of the cream-colored plastic covers that are associated with this guitar. The weight and the tonal characteristics of the Goldtop Les Paul were largely due to the mahogany and maple construction.
In 1953, the trapeze tailpiece was dropped, and a new stopbar design was added. This design combined a pre-intonated bridge and tailpiece with two studs just behind the bridge pickup. This increased the sustain of the Goldtop noticeably; however, the intonation and string height adjustability were limited. A new design, the Tune-o-matic, replaced the stopbar in 1955. It consisted of a separate bridge and tailpiece attached directly to the top of the guitar, combining an easily adjustable bridge with a sustain-carrying tailpiece. This design has been used on most Les Pauls ever since. The tuners were produced by Kluson.1954 Custom with P90 pickups. 1960 Custom reissue with PAF pickups. Main article: Gibson Les Paul Custom
The Les Paul Custom features gold hardware, multilayer binding including the headstock, ebony fingerboard, real mother-of-pearl inlays and two or three-pickup layout. 1950s Customs were all-mahogany, rather than the mahogany-with-maple-cap of the Goldtop. The original Customs were fitted with a P-90 pickup in the bridge position and an Alnico V "staple" pickup in the neck. In 1957, the Custom was fitted with Gibson's new PAF humbucker pickups, and later became available with three pickups instead of the usual two. The traditional Les Paul Custom was discontinued in 1961 and its name transferred to the custom version of the then-new Gibson SG.
In 1968, Gibson reintroduced the Les Paul Custom as a two-pickup-only model. The headstock angle was changed from 17 degrees to 14, and a wider headstock and a maple top (in lieu of the original 1953-1961 mahogany top construction) were added. White and two sunburst finish options were added to the color palette in 1974. Also new in 1974 was the optional TP-6 fine-tuner tailpiece, allowing for micro-adjustment of string tuning from the bridge. The mahogany neck was replaced with a three-piece maple neck in 1975 (though mahogany still saw limited use) with this change lasting till around 1982. Popular colors, such as wine red and "silverburst," were added in the 1970s and '80s. Gibson currently produces several Custom models with various finishes and pickups.See also: Flame maple § Gibson Les Paul Standard Paul McCartney playing a 1960 left-handed cherryburst Les Paul Gibson Custom 50th Anniversary 1959 Les Paul Standard (2009)
In 1958, new Standard model retained most specifications of the 1957 Goldtop, including PAF humbucker pickups, a maple top, and a tune-o-matic bridge with a stop tailpiece or Bigsby vibrato tailpiece. The gold color used since 1952 was replaced by a cherry-red version of the Sunburst finish long used on Gibson's flat-top and archtop acoustic and hollow electric guitars. Since the maple cap was now visible, tops were made either with a solid "plaintop" piece of maple or two bookmatched pieces of figured (curly or quilted) maple. To differentiate from the earlier Goldtop model, the new Les Paul was referred to as The Les Paul Standard. Specifications during 1958–60 varied from year to year and also from guitar to guitar. Typical 1958 Les Paul Standard necks had a thicker neck, thinner frets and lower fret height, which changed during the course of 1959 to develop into typical 1960 necks with a thinner cross-section and wider, higher frets.[note 6][note 7] The cherry dye used on the 1958–59 models faded rapidly from ultraviolet light exposure, so in early 1960 Gibson switched to a new, fade-resistant formulation which was also less translucent and slightly more orange; this is sometimes called the "tomato soup burst." Original production of the Standards lasted from 1958 to early 1961. Only about 1,700 of these early models were made and have subsequently become highly valuable.[note 7]
Production ended when, in 1961, Gibson redesigned the Les Paul to feature a "double cutaway" body, which has subsequently become the Gibson SG. Because of high demand, Gibson resumed production of Les Paul Standards in 1968.Main article: Gibson Les Paul Junior 1958 Junior 1959 TV reissue
(Junior DC in TV Yellow)
In 1954, the Les Paul Junior debuted, targeted the beginning or student guitarist. The Junior is characterized by its flat-top "slab" mahogany body, finished in sunburst. It had a single P-90 pickup, simple volume and tone controls, an unbound rosewood fingerboard with plain dot-shape position markers, and a combination bridge/tailpiece unit similar to the Goldtop.
In 1955, Gibson launched the Les Paul TV model, which was identical to the Junior except for the name and a fashionable contemporary "limed oak" style finish, later more accurately named "limed mahogany". This natural wood finish with white grain filler often aged into a natural wood or dull yellow appearance, and eventually evolved into the opaque mustard yellow, popularly called "TV yellow". The model was not, as a popular myth says, to avoid glare from old TV cameras, but a modern look and a name to promote "The Les Paul & Mary Ford Show" then on television.
Gibson made a radical design change to their Junior and TV models in 1958: to accommodate player requests for more access to the top frets than the previous designs allowed, these electric guitar models were revamped with a new double-cutaway body shape. In addition, Juniors were now available with a cherry red finish, while the re-shaped TV adopted a more yellow-tinged finish.1956 Les Paul Special Singlecut in TV Yellow 1960 SG Special (Les Paul Special Doublecut) Recent Les Paul Special Faded Main articles: Gibson Les Paul Special and Gibson Les Paul Doublecut
The Les Paul Special was released in 1955, featuring a slab body, two soapbar P-90 single coil pickups, and was finished in a color similar to TV Yellow (but not called a TV model).
In 1959, the Special was given the same new double-cutaway body shape as the Junior and the TV received in 1958. Around this time, Les Paul decided to discontinue his affiliation with Gibson; the model was renamed "SG Special" in late 1959. However, when the new design was applied to the two-pickup Special, the cavity for the neck pickup overlapped the neck-to-body joint. This weakened the joint to the point that the neck could break after only moderate handling. The problem was soon resolved when Gibson designers moved the neck pickup farther down the body, producing a stronger joint and eliminating the breakage problem.Gibson The Paul See also: Gibson The Paul
A single sharp cutaway Les Paul-style walnut body, set walnut neck, 22-fret ebony fingerboard with pearl dot inlays, walnut headstock overlay with gold Gibson logo (1978-1981) or Gibson logo branded into the headstock (Firebrand, 1981-1982), three-per-side tuners, tune-o-matic bridge, stop tailpiece, two exposed humbucker pickups, four knobs (two v, two tone), three-way pickup switch, chrome hardware, available in Natural Walnut finish, 24.75 in. scale, 1.6875 in. nut width, mfg. 1978-1982. It included such high end items as the Grover tuning keys and the Tune-O-Matic bridge. Affectionately called by some, "The Coffee Table Burst" because of its natural finish.
Main article: Gibson SG 1962 Les Paul Standard (SG Standard)
In 1960, Gibson experienced a decline in electric guitar sales due to strong competition from Fender's comparable but much lighter double-cutaway design, the Stratocaster. In response, Gibson modified the Les Paul line. For 1961, the Les Paul was thinner and much lighter than earlier models, with two sharply pointed cutaways and a vibrato system. However, the redesign was done without Les Paul's knowledge, and he hated the design, so he asked Gibson to remove his name. The single cutaway designed retained the "Les Paul" name until 1963 when Les Paul's endorsement deal with Gibson ended. Without a contract, Gibson could no longer call its guitars "Les Pauls', and it renamed them "SGs" (for "Solid Guitars").1972 Deluxe with mini-humbuckers 1969 Deluxe
The Deluxe was among the "new" 1968 Les Pauls. This model featured "mini-humbuckers", also known as "New York" humbuckers, and did not initially prove popular. The mini-humbucker pickup fit into the pre-carved P-90 pickup cavity using an adaptor ring developed by Gibson in order to use a surplus supply of Epiphone mini-humbuckers. The Deluxe was introduced in late 1968 and helped to standardize production among Gibson's U.S.-built Les Pauls. The first incarnation of the Deluxe featured a one-piece body and slim three-piece neck. The multipiece body (a thin layer of maple on top of two layers of Honduran mahogany) arrived in 1969. In late 1969, a reinforcing neck volute was added. 1969 Deluxes feature the Gibson logo devoid of the dot over the "i" in Gibson. By late 1969/early 1970, the dot over the "i" had returned, plus a "Made In USA" stamp on the back of the headstock. The Deluxe could be specially-ordered with full-size humbucker pickups; such full size versions of the Deluxe were "Standard" spec. By 1975, the neck construction was changed from mahogany to maple, until the early 1980s, when the construction was returned to mahogany. The body changed back to solid mahogany from the pancake design in late 1976 or early 1977. Interest in this particular Les Paul model was so low that in 1985, Gibson canceled it. In 2005, the Deluxe was re-introduced.
In 1978, the Les Paul Pro Deluxe was introduced. This guitar featured P-90 pickups (like the original 1952-1956 LPs) instead of the "mini-humbuckers" of the Deluxe model, an ebony fingerboard, maple neck, mahogany body and chrome hardware. It came in ebony, cherry sunburst, tobacco sunburst or gold finish. It was discontinued in 1983.
The Gibson Dark Fire, a variant of the Gibson Les Paul, was an electric solid body guitar produced by Gibson Guitar Corporation. It was a second generation Robot Guitar, using an updated version of the Powertune self-tuning system produced by Tronical Gmbh. The Dark Fire also introduced Gibson's Chameleon Tone Technology, a system consisting of onboard electronics designed to simulate various guitar tones. Additionally, the guitar included an audio interface called the Robot Interface Pack or RIP.
The Dark Fire had one Burstbucker 3 humbucker in the bridge position, a P-90H at the neck, and a special Tronical-designed piezoelectric tune-o-matic sat in the place of the bridge. The Burstbucker 3 and P-90H were selected via the three-way selector switch. The piezoelectric could be activated via the MCK, blending the magnetic and piezoelectric together under a standard 1/4" guitar cable. Gibson supplied a TRS stereo cable that allowed the piezo signal and the magnetic signal to be split between two different amps.See also: Gibson Les Paul Studio Studio 2001 Studio headstock
The Studio model was introduced in 1983, and is still in production. The guitar is intended for the studio musician; therefore, the design features of the "Les Paul Studio" are centered on optimal sound output and not on flashy appearance. This model retains only the elements of the Gibson Les Paul that contribute to tone and playability, including the carved maple top and standard mechanical and electronic hardware. However, the Studio design omits several stock Gibson ornamentations that do not affect sound quality, including body/neck binding. The first Studios from 1983 to 1986 were made with alder bodies rather than mahogany/maple. The current Studios come with a chambered mahogany body with either a maple or mahogany cap. The entry level Les Paul Studio "faded" has a weight relieved mahogany body and top and a satin finish.
Gibson also offered the Studio in a "standard" model. This variant was adorned with neck and body binding, ebony fretboard and sunburst paint job. All Studios at the time had dot fretboard markers and a thinner body.
Gibson released the ES-Les Paul in 2015. It is a semi-acoustic model with f-holes and two Alnico humbuckers. The neck is mahogany, but the sides and back are laminated maple and poplar. A mahogany block runs throughout the body to increase sustain.Les Paul playing his customized Les Paul Recording guitar
Until his death in August 2009, Les Paul himself played his personal Les Paul Guitar onstage weekly in New York City. Paul preferred his 1971 Gibson "Recording" model guitar, with different electronics and a one-piece mahogany body, and which, as an inveterate tinkerer and inventor, he had modified heavily to his liking over the years. A Bigsby-style vibrato was of late the most visible change although his guitars were formerly fitted with his "Les Paulverizer" effects.Main article: Epiphone Les Paul Les Paul Special II Les Paul Ultra II
The Gibson-owned Epiphone Company makes around 20 models of the Les Paul, most are similar copies of Gibson-made models. Made in places outside the U.S., the Epiphone Les Pauls are made from more commonly available woods using less expensive foreign labor and have less hand detailing than the Gibson models, and, as a result, sell for a lower price. Epiphone Guitar Co. has been owned by Gibson Guitars since the 1950s.
Epiphone also makes several less common models of the Les Paul such as the Les Paul Goth, Les Paul Ultra/Ultra II, Les Paul Prophecy, and Les Paul Tribute Plus.Jimmy Page with a Goldtop Classic Premium, one of his many Les Pauls Main article: Jimmy Page § Signature models
Gibson has produced three Jimmy Page signature models. The first was issued in the mid-1990s. It is based on a stock sunburst Les Paul Standard. In 2005 the Gibson Custom Shop issued a limited run of Jimmy Page Signature guitars based on Jimmy Page's 1959 "No. 1". Several years later, Gibson issued its third Jimmy Page Signature guitar, this one based on Jimmy Page's #2, issued in a production run of 325 guitars.Slash with one of his signatures in 2007
Slash has collaborated with Gibson on eight signature Les Paul models.
The first of these guitars is the Slash "Snakepit" Les Paul Standard, which was introduced by the Gibson Custom Shop in 1996, based on the smoking snake graphic off the cover of Slash's Snakepit's debut album and a mother of pearl snake inlay covering the length of the ebony fretboard. Production was limited to 100.Gibson Slash "Appetite" Les Paul
In 2004, the Gibson Custom Shop introduced the Slash Signature Les Paul Standard, a guitar that Gibson has used ever since as the "standard" non-limited edition Slash Les Paul. In 2008, Gibson USA released the Slash Signature Les Paul Standard, an authentic replica of one of two Les Pauls Slash received from Gibson in 1988. It has an Antique Vintage Sunburst finish over a solid mahogany body with a maple top. Also in 2008, the Gibson Custom Shop introduced the Slash "Inspired By" Les Paul Standard. This guitar is a replica of his 1987 Les Paul Standard.
In 2010, Gibson released the Slash "Appetite" Les Paul Standard as a tribute to Guns N' Roses' debut album, Appetite for Destruction, which resembles the Kris Derrig built 1959 Les Paul replica Slash used for the recording of the album. Production was limited to 400, with 100 aged guitars signed by Slash, and another 300 finished with the Custom Shop's VOS process.Joe Perry playing his signature "Boneyard" Les Paul
Gibson has issued two signature Les Paul guitars for Joe Perry of Aerosmith. The first was developed in 1996 and was customized with an active mid-boost control, black chrome hardware, and a translucent black finish. It was replaced in 2004 by a second, more visually distinctive Les Paul, the "Boneyard" Les Paul. This guitar is characterized by Perry's custom "Boneyard" logo on the headstock and a figured maple top with a green tiger finish, and is available with either a stopbar tailpiece or a Bigsby tailpiece.Gary Moore Les Paul
Gary Moore created his own signature Les Paul in the early 2000s, characterised by a yellow flame top, no binding and signature truss rod cover. It featured two open-topped humbucker pickups, one with "zebra coils" (one white and one black bobbin). In 2009, Gibson released another Gary Moore signature guitar, the Gibson Gary Moore BFG Les Paul. The Gary Moore BFG is much like their previous Les Paul BFG series, with the added styling of Moore's various 1950s Les Paul Standards.Peter Frampton '54 Custom
A replica of the three-pickup "Black Beauty" Les Paul Custom used by Peter Frampton as his main guitar from his days in Humble Pie through his early solo career was introduced through the Gibson Custom Shop in 2012. Frampton's original guitar was a 1954 Les Paul modified extensively. His famous guitar was presumed lost in a South American plane crash in 1980, but was returned to Frampton in 2011.
Gibson used hundreds of photographs of the late blues guitarist's instrument to produce the limited-edition Bloomfield signature. The company produced one hundred Bloomfield models with custom-aged finishes and two hundred more with the company's VOS finishing in 2009. They reproduced the tailpiece crack on the aged version, plus the mismatched volume and tone control knobs and the "Les Paul"-engraved truss rod cover on both versions, while including a toggle switch cover. The headstock was characterized by the kidney-shaped Grover tuning keys installed on the guitar before Bloomfield traded for it.Roger Daltrey & Pete Townshend with his modified Les Paul Deluxe
In 2005, Gibson issued three Pete Townshend signature edition Les Paul Deluxe guitars, based on Townshend's heavily customised "#1" Wine Red 1976 Les Paul Deluxe, "#3" Gold top 1976, and "#9" Cherry Sunburst 1976. These guitars were modified by Alan Rogan and used extensively on stage and in the studio with The Who. In addition to the two mini-humbuckers the guitar carried, Rogan modified Townshend's originals with a DiMarzio humbucker in the middle. Toggle switches located behind the guitar's tailpiece turned the pickup on and off and added volume boost. The control knobs were wired for volume, one for each pickup and a master volume. The reissues differed from Townshend's originals in that the reissues had an inlay at the first fret while the originals did not.Ace Frehley
with his 3-pickup Les Paul Custom Billy Gibbons
with a Les Paul Goldtop
The Ace Frehley (KISS) signature model (released in 1997 and re-released in 2012) has three double-white DiMarzio pickups, a cherry sunburst finish (AAAA), a color image of Frehley's face in his Kiss make-up on the headstock, mother-of-pearl lightning bolt inlays, and Ace's simulated signature on the 12th fret. A Custom Shop run of only 300 guitars were built with DiMarzio PAF, Super Distortion, and Dual Sound pickups. The production run model was only built with DiMarzio Super Distortion pickups. This was one of Gibson's best selling artist runs. The more recent 2012 "Budokan" model, intended to pay tribute to the guitar used during the KISS' first trip to Japan in 1977, features mother-of-pearl block inlays (no signature at the 12th fret), Grover machine heads with pearloid banjo buttons, and a grade A maple top.
Billy Gibbons of ZZ Top has a signature model and pick-up based on his famous "Pearly Gates" 1959 Les Paul Standard.Eric Clapton playing a Les Paul in 1987, on the right of George Harrison
Clapton played a 1960 Standard as a member of John Mayall and the Bluesbreakers as well as in the early days of Cream. The guitar was said to have been stolen while Clapton was preparing for the first Cream tour in 1966, following the recording of Fresh Cream, and was long considered an iconic instrument by Clapton's fans. Gibson announced production of the Clapton 1960 Standard, also nicknamed the "Beano Burst", in 2010. Gibson says the instrument "accurately represents what Eric Clapton personally feels his 1960 Les Paul should be", with Clapton consulting on the design of the guitar. Production is limited but all feature period-correct hardware, two Gibson reproduction PAF humbucking pickups, and subtly figured "antiquity burst" maple tops.
Paul Kossoff, of Free and Back Street Crawler, favored a 1959 Les Paul Standard. In 2011–12, Gibson's Custom Shop made a reproduction of Kossoff's Standard, featuring a so-called "green-lemon" flametop, two-piece carved maple top, mahogany body and neck, Custom Bucker humbucking pickups and kidney-bean shaped Grover tuners similar to those Kossoff had installed on the instrument. 100 Kossoff models were made to resemble the guitar at the time of Kossoff's death in 1976, with another 250 in a VOS finish.Main article: List of Gibson players
Although early Les Paul imitations in the 1960s and 1970s, such as those made by Höfner, Hagström, Harmony Company, and Greco differed from Gibson's designs, with different electronics and even bolt-on necks, in the late 1970s some Japanese companies came very close to perfecting copies of the original 1958-1960 Standards.
A lawsuit was brought by the Norlin Corporation (the parent company of Gibson) in 1977, against Elger/Hoshino U.S.A. (manufacturer and distributor, respectively, of Ibanez) over use a headstock shape and logo, both considered similar to the Gibson designs. However, the suit was based on an Ibanez headstock design that had been discontinued by 1976. The case was officially closed on February 2, 1978. Those mid-1970s guitars later became known as "lawsuit era" guitars.
ESP Guitars makes several guitars based on the Les Paul design. The Edwards and Navigator lines are made in Japan in the vein of the late 1970s and 1980s guitars from Tokai, Burny, and Greco, complete with Gibson style headstocks.
Heritage Guitars, founded in 1985 by four long-time Gibson employees when Gibson relocated to Nashville, continues to build guitars at the original factory in Kalamazoo, Michigan. Many of their models are inspired by Gibson's late-1950s/early-1960s sunbursts and Customs.
In 2006, Gibson lost a lawsuit against PRS Guitars, Gibson claiming PRS was infringing on the Les Paul shape and design. The court's decision allowed PRS to reintroduce single cutaway versions of its instruments.
In 2008, Gibson lost the trademark for the Les Paul in Finland. According to the court, "Les Paul" has become a common noun for guitars of a certain type. The lawsuit began when Gibson sued Musamaailma, which produces Tokai guitars, for trademark violation. However, several witnesses testified that the term "Les Paul" denotes character in a guitar rather than a particular guitar model. The court also found it aggravating that Gibson had used Les Paul in the plural form and that the importer of Gibson guitars had used Les Paul as a common noun. The court decision will become effective, as Gibson is not going to appeal.
- ^ Original "The Log" was exhibited at Country Music Hall of Fame, Nashville. A replica of "The Log" (loaned from Les Paul Foundation) have been exhibited on "Les Paul Experience" permanent exhibition at Waukesha County Museum.
- ^ This Les Paul prototype was refinished in cherry sunburst from original goldtop, pickups are replaced with his lo-impedance type, and also Bigsby vibrato tailpiece is installed. This guitar have been exhibited on "Les Paul Experience" permanent exhibition at Waukesha County Museum.
- ^ This Les Paul prototype (white) has an appearance similar to the later Les Paul Personal model because its pickups were replaced by the low-impedance type, however, the existence of trapezoid-type bridge/tailpiece imply that it is early Les Paul.
- ^ In the summer of 1952, Gibson Les Paul Goldtop was priced at US$209.
- ^ This guitar (1953 Goldtop exhibited at FUZZ Guitar Show 2008) was used by Carl Perkins on many of his early "Sun Records" Recordings
- ^ "10 Most Valuable Guitars", Vintage Guitar (2010) , mentioned on:Paul Schille (Dec 17, 2010), Vintage Guitar Releases List of 10 Most Valuable Guitars, TheGiggingMusician.com
- ^ a b Greenwood, Alan; Gil Hembree (April 2011). "25 Most Valuable Guitars". Vintage Guitar. pp. 38–40.
The 1958–60 Standard is one of the highest priced vintage guitar models on the market, ranked at # on the 2011 Top 25 published by Vintage Guitar, and worth between $225,000 and $375,000.